Easy Machine Embroidered Burp Cloths Tutorial (2024)

This post may contain affiliate links, which means I’ll receive a commission if you purchase through my links, at no extra cost to you. Please read disclosure for more information.

Embroidering burp cloths is easy with an embroidery machine, and they make a perfect embroidered baby gift for new parents. Because, well, most parents need to use burp cloths at some point, whether it’s cleaning up spit-up or wiping up messes on the go!

This embroidered burp cloths tutorial will walk you step-by-step through the process of picking an embroidery stabilizer, choosing a burp cloth, selecting a design, and setting up your machine.

Easy Machine Embroidered Burp Cloths Tutorial (1)

Table of Contents

Burp Cloth Embroidery Supplies

Best Burp Cloths to Embroider

Easy Machine Embroidered Burp Cloths Tutorial (2)

When I was a new mom, I got a lot of embroidered cloth diapers that double as burp cloths. I never loved how thick they were and how they took up a lot of space in a diaper bag. The softness wasn’t that great either if I was going to use them for wiping one of my daughters’ mouths after a spit-up.

So, I tried muslin burp cloths, and those are my favorite burp cloths to use for embroidered gifts!

They’re more difficult to embroider because they are thinner, more lightweight, and thus more pliable than 3-fold cloth diapers. But, I think the finished product is cuter and more functional. Here’s the link to the exact ones I use!

They do shrink a bit during the first wash, so consider prewashing before embroidering.

What’s the best stabilizer to use on a burp cloth?

Easy Machine Embroidered Burp Cloths Tutorial (3)

Your choice of burp cloth stabilizer depends on two big factors: the density of your embroidery design and the characteristics of your burp cloth fabric.

For very dense designs on burp cloths with any amount of stretch, you will want to use cut-away stabilizer or no-show mesh stabilizer.

While you might luck out with a decent embroidered project using tear-away, the issue is once washed, those dense designs stitched on tear-away tend to pucker horribly! This makes for a rough, unsightly mess.

With cut-away stabilizer that remains permanently on the back of the burp cloth, your design and cloth will withstand repeated washings better. This is very important for a burp cloth, which is expected to get messy!

If you have a fairly lightweight design and a burp cloth that provides good stability to it, you can try tear-away stabilizer or wash-away stabilizer, but if you don’t get good results, fall back on using a more robust cut-away stabilizer.

I also like to use a water-soluble topping on the front of the burp cloth.I’ve found my designs cause less distortion of the delicate burp cloth puffs and are supported better with this added layer.

Design Ideas

My favorite designs to embroider on burp cloths are monograms, applique designs, and cute fill-stitch designs with plenty of empty space.

If you have a lightweight burp cloth like the case for me, you need a design with a lower stitch count. If you have a more stable, heavier burp cloth, you have more flexibility with design selection.

(Check out where to free baby embroidery machine designs if you’re looking for design inspiration!)

Machine Embroidery on Burp Cloths – Tutorial

1. Marking the Burp Cloth

Easy Machine Embroidered Burp Cloths Tutorial (4)

The first thing you need to do is prepare your burp cloth to embroider. This means marking your burp cloth where the center of your chosen embroidery design will go.

I like putting my designs on the skinny end of the burp cloth and centering them. I used to put them in a corner, but I like folding the cloths in thirds when gifting them, and the middle just looks better that way!

It helps to fold the burp cloth in half to discover the horizontal center to mark. Mark the vertical dimension by using a template printed from your software or just eyeballing it.

2. Hooping vs. Floating the Burp Cloth

While I’m a big fan of hooping whenever I can to decrease movement during the embroidery process, the burp cloths I embroider on are close to impossible to hoop without distortion.

As such, I prefer to float them on top of the hoop.

To float a burp cloth, first, hoop your piece of stabilizer in the hoop. I’m using one layer of no-show mesh stabilizer. (Read: hooping tutorial for tips, if needed!)

Easy Machine Embroidered Burp Cloths Tutorial (5)

Then, spray a light layer of Odif 505 or another temporary fabric spray on the stabilizer. (You can use painter’s tape to shield the sides of your hoops or just clean well after the project if you get some side spray.)

Press the burp cloth onto the stabilizer, making sure to line up the center of the marked burp cloth with the center of the hooped stabilizer. Add one layer of water-soluble topping on the front.

While I’ve had reasonable success embroidering burp cloths without topping, I think the topping supports the stitches better during the process and retains more of the texture of the burp cloth after embroidery.

Easy Machine Embroidered Burp Cloths Tutorial (6)

My burp cloths need extra stability, so I always pin the perimeter. If you prefer not to pin, you can use a basting box (learn more in what is a basting box in embroidery?) to secure the burp cloth before you start to stitch.

Easy Machine Embroidered Burp Cloths Tutorial (7)

3. Setting the Machine to Embroider

Now, load the burp cloth into your embroidery machine!

While I usually hoop my materials with the bulk of the material facing away from the throat space of the machine, I prefer to roll the burp cloth on the inside of the machine.

In my mind, this means less stress on the burp cloth from the excess fabric hanging off the left of the machine over the carriage. Is that the case? I’m not sure, but I feel better about it!

Easy Machine Embroidered Burp Cloths Tutorial (8)

Then, line up the center of the marked burp cloth with the embroidery foot.

Check that you have the correct needle, bobbin thread, upper thread, and design orientation. I had to rotate my design to get the correct orientation for how I floated my burp cloth.

If you used pins, it’s very important to preview the area of stitching to make sure you won’t accidentally embroider over a pin. I did that once before and it did not end well for my needle!

If everything looks good, press go, and watch the stitching magic begin! Change threads as needed between stops.

4. Finishing Up

Once the burp cloth is embroidered, remove the hoop from your machine. Release the burp cloth from the hoop and remove the pins or your basting box.

I think it’s easier to clip jump stitches with the water-soluble topping still on the top.

For best results, while you’re supposed to clip jump stitches after each thread color, I only follow that rule when there are large jump stitches that look like they’ll actually interfere! I like to clip my jump threads with double curved embroidery scissors.

Easy Machine Embroidered Burp Cloths Tutorial (9)

After you’ve clipped the jump stitches, pull the water-soluble topping off the front of the burp cloth. If you can’t get it all, it is easily removed later with water.

Easy Machine Embroidered Burp Cloths Tutorial (10)

Turn the burp cloth over and trim away the excess stabilizer on the back. Duckbill applique scissors are the best for doing this, in my opinion, because they prevent fabric clipping!

Spritz the front with water, run it underwater, or even wipe a wet baby wipe over the front of the burp cloth to remove the fabric pen and residual water-soluble topping.

Let dry, and you’re all done!

Easy Machine Embroidered Burp Cloths Tutorial (11)

I hope you enjoyed learning to embroider a burp cloth. If you’re looking for more baby gifts to make, check out how to embroider a baby bib and how to machine embroider a baby onesie!

Easy Machine Embroidered Burp Cloths Tutorial (2024)


What is the best burp cloth DIY? ›

Gerber cloth diapers in a pack of 10 are hands down the best burp rags out there.” “Get Gerber Cloth Diapers makes very absorbent burp clothes and much cheaper than traditional ones.”

How many layers of flannel do I need for a burp cloth? ›

I only use two flannels no batting when making burp cloths. I have seen some in LQS that use just two layers of flannel. They feel really soft and I bet they are absorbent. I have been making burp clothes using flannel on one side and a prefolded diaper on the other.

Do you use batting in burp cloths? ›

Purchase ⅓ yard of flannel for each of your homemade baby burp cloths. I also used Cotton Batting for padding. The cotton flannel and batting are both washable and absorbent. Note: You could choose to get a fleece iron on interfacing instead of the batting if you prefer.

What is the best size for a burp cloth? ›

What is the standard size of a baby burp cloth? Most burp cloths are around 15 -22” in length and 10 - 15” in width. They are this long so that they offer as much coverage as possible and also drape over the shoulder without falling off.

Is flannel or cotton better for burp cloths? ›

Flannel: Flannel does a pretty good job of absorbing, but is not so great at keeping the mess from smearing all over the place. Gross. Terry Cloth: Great for absorbing liquids and pretty good at keeping smearing to a minimum. Overall, this is my second-choice material if I don't have cotton chenille.

What kind of burp cloths are best? ›

We recommend the Aden + Anais Burpy Bib if you like the classic muslin feel and value one-and-done products that will be useful for many years. But if you are a parent shopping on a budget, the absorbent Gerber Prefold Gauze Diaper may be a better pick.

How many burp cloths does a new mom need? ›

If you are wondering, 'how many burp cloths do I need?' It depends on how often your young one spits up, the number of feedings(which are unnumbered as they are still breastfeeding), and how often you want to do the laundry. But anywhere between eight to 14 burp cloths is a good number to have for a single baby.

What is the difference between a burp cloth and a muslin? ›

Muslin Cloth v's Burping Cloths

Use – These are used during feeding to wipe away small amounts of milk. While spit-up pads protect you and your clothes when burping a newborn. Size – Muslin cloths are square in shape and measure 25cm x 25cm. They are smaller in size than spit-up rags.

Why are burp cloths thicker in the middle? ›

Whether the burp cloth is thicker or thinner, if it's super absorbent Pampers Parents loved it. Some burp cloths come with a plastic liner or an ultra-absorbent middle layer so that moisture doesn't seep through, whereas some products are just so thick that that they catch most of the liquid.

What can I use instead of burp cloths? ›

First and foremost, cloth diapers are more durable than traditional burp cloths. The material of cloth diapers is thicker and more absorbent than a standard cotton burp cloth. They can be washed and used over and over again without wearing out—and that's a good thing for burp cloths, because babies spit up a lot.

What embroidery stabilizer to use? ›

Use Cut Away stabilizer if the fabric has any stretch – t-shirts, sweatshirts, knits, etc. Use a Tear Away Stabilizer if the fabric is stable woven. Use a Wash Away if using a sheer fabric or freestanding lace design such as our Vintage Lace, 3D Flowers, 3D Butterflies, or 3D Leaves, etc.

Can you embroider straight onto fabric? ›

Adding embroidery to your clothes is the perfect way to do this. The technique is very easy and works exactly the same way as any other hand embroidery. Depending on the design and the fabric type you can either use a hoop or simply stitch straight onto the fabric.

Can you make your own burp cloths? ›

Now when I say these are the easiest and best burp rags you will ever sew, I really mean it. Two rectangles of fabric sewn together, flipped right-side out, and then topstitched. I am not kidding, they are that easy. So now that you're not scared of this sewing, let's dive right in!

Top Articles
Latest Posts
Article information

Author: Rueben Jacobs

Last Updated:

Views: 5339

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Rueben Jacobs

Birthday: 1999-03-14

Address: 951 Caterina Walk, Schambergerside, CA 67667-0896

Phone: +6881806848632

Job: Internal Education Planner

Hobby: Candle making, Cabaret, Poi, Gambling, Rock climbing, Wood carving, Computer programming

Introduction: My name is Rueben Jacobs, I am a cooperative, beautiful, kind, comfortable, glamorous, open, magnificent person who loves writing and wants to share my knowledge and understanding with you.